Toro 252-26-06 1.5 in. FPT Angle Valve with Flow Control
Toro� 252 Series valves are built tough and ready to withstand
the harshest conditions in any commercial application.
With several confi gurations to choose from, 252 Series valves
are available in electric or hydraulic, 1�, 1.5� and 2� globe/
angle models with fl ow control. Offering the same glass-fi lled
cap and body construction as the 250/260 Series, these valves
are also rated up to 150 PSI. Each valve diaphragm is a single
piece and made with fabric- reinforced rubber for long-term
tear and stretch tolerance. All models are female inlet/outlet
NPT and their durable plastic construction makes them an
economical option for commercial applications.
Features and Benefits
Heavy-Duty Toro Solenoid
Provides dependable operation and long life.
High-Grade Construction
Made of durable materials to resist wear.
Globe and Angle Configurations
Easy to use in any application.
Fabric-Reinforced Rubber Diaphragm
Provides long-term tear and stretch tolerance.
Water Flow Control Handle
Adjusts the flow of each zone on a system.
Robust ABS Material
Ensures the valve will resist heavy pressure and
high flows without damage.
- Globe and globe/angle built into one valve
- Manual flow control
- External manual bleed
- 24� lead wires (1 �� and 2� electric) or
18� lead wires (1� electric)
- Self-cleaning, stainless steel metering pin
(electric)
- Tough, glass-filled bonnet
- Single-piece diaphragm
Specifications
- Operational
- Recommended Flow Range:
� 1� � 5.0 to 20 GPM
� 1 �� � 25 to 70 GPM
� 2� � 60 to 90 GPM
- Operating Pressure: 20 to 150 psi
- Solenoid: 24 VAC, 50/60 Hz
�Inrush: 0.30 amps, 7.20 VA
�Holding: 0.20 amps, 4.80 VA
- Burst pressure safety rating: 750 psi