Blazing Twist Locking Waterproof Small Wire Connectors (25 ct.) | TLC-10-25

Blazing Twist Locking Waterproof
Small Wire Connectors

Great for use in irrigation and or landscape lighting applications, this connector is already silicone-filled ready to use for low voltage applications.

Features Benefits

• Silicone filled connector
• For use in irrigation and landscape lighting applications
• For low voltage applications (30V Max, 10 Amps)

Product Specifications & Measurements

• Max. Voltage: 30V max. building wire, 10AMPS
• Connector Size: 1" x .5"
• Wire Type: Copper/Copper
• Wire Range: Min #20/Max #14 (STR), #18 (SOL)
• Temperature Rating: 90°C (194°F)
• Silicone Sealant Temperature: -40°F to 400°F

Measurements

• A - 0.981"
• B - 0.491"
• C - 0.362"

Installation Instructions

IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.

1. Strip wires 1/2” (12.7mm) and align frayed strands and conductors. Pretwisting of wires unnecessary.
2. Hold stripped wire ends evenly together. Lead stranded wire(s) beyond solid wire ends by approximately 1/16” (1.6mm).
3. Firmly hold wire combination together and insert it through the center of the cap on the end of the connector.
4. Continue to push and twist (clockwise) until hand tight 1 to 2 wire wraps should be visible, do not over torque.
5. . Wipe any excess silicone in and around the wires. Do not reuse.