DIG 1/8 in. Black Poly Tubing (.125 ID x .187 OD) (60 PSI) (3000 ft.) | 12-085

• PSI: 60
• Length: 3000 ft
• Diameter: 0.125 ID x 0.187 OD

Features & Benefits

DIG’s 1/4″ blank polyethylene distribution tubing is available in several colors and in lengths of up to 3000’. The distribution tubing is manufactured from high-quality, low-density polyethylene resin with a minimum of 2% carbon black to protect the finished product from thermal degradation, ultraviolet stress, and chemicals.

• Blank polyethylene distribution tubing is available in 50′, 100′, 500′, 1000′ and 3000′ coils (15 m, 30 m, 150 m, 300 m, 900 m)
• Used with drip emitters, micro sprayers or micro-sprinklers in above- or below-grade installation
• 500′, 1000′ and 3000′ coils (150 m, 300 m, 900 m) are wound on cardboard cores
• Extruded from the finest quality low-density polyethylene resins
• UV resistant; contains a minimum of 2% concentrated carbon black, an antioxidant that protects the tubing from thermal degradation
• Supported by quality control standard and processes to ensure consistent coil productions
• Exhibits outstanding environmental stress-cracking resistance and burst strength

Product Details

• Operating pressure: up to 60 PSI (4.2 BAR)
• Material: Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black
• Available in three configurations:
  • .125" ID x .187" OD (3.2 x 4.7 mm)
  • .170" ID x .250" OD (4.3 x 6.3 mm)

Related Articles & Videos

Articles

• Step By Step Drip Irrigation System Installation Guide
• Drip Irrigation Benefits & How It Works
• Drip Irrigation Tubing Basics
• Emitter Different Types And Functions Of Emitters

Videos

• Why Use Drip Irrigation?
• Drip System Zones