The Pro-C Hydrawise combines the power of Wi-Fi-based irrigation management and the convenience of modular functionality into one next-generation controller. The Pro-C Hydrawise helps contractors save time, save water, protect landscapes, and meet the demands of customers who want smart home solutions. In addition, it lets contractors continue using their Roam and Roam XL remotes for quick on-site management.
Among the controller's many robust features is Predictive Watering, which adjusts irrigation schedules based on local, real-time temperature, rainfall probability, wind, and humidity. A built-in milliamp sensor makes troubleshooting wiring issues easy. By adding a simple-to-install HC Flow Meter, users can receive notifications regarding leaking pipes or broken sprinklers. Users can also manage the controller from anywhere using a smartphone, tablet, or computer.
The Pro-C Hydrawise is EPA WaterSense approved. Hydrawise is also compatible with Amazon Alexa for convenient voice control to start, stop, and suspend irrigation.
Touch-Screen Iinterface (Pro-C Hydrawise)
The Pro-C Hydrawise controller has a full graphical touchscreen interface, which makes programming with or without Wi-Fi connectivity and manual starting from the controller a breeze.
Predictive Watering Adjustments
Daily schedule adjustments based on local weather data monitor past, current and forecasted temperature, rainfall, humidity, and wind speed. This allows for adjustments of watering times and schedules to balance water savings with water efficiency for plants.
Flow Meter Detection And Alerts
Monitor your piping and sprinklers with an optional flow meter. Receive automatic alerts when a pipe is broken to prevent property damage.
Wiring Detection And Alerts (Pro-C Hydrawise)
Pro-C Hydrawise controllers continuously monitor the electrical current flowing to your solenoid valves. If the current is too high or too low, Hydrawise will alert you and tell you which valve is not working properly. This allows you to correct a failed valve before damage is done to plant materials.
Hydrawise EPA WaterSense Approved Smart Watering
All Hydrawise compatible controllers connected to Hydrawise web-based software are EPA WaterSense approved Smart Watering Controller. Hydrawise Predictive Watering allows the controller to adjust schedules based on forecasted temperature, rainfall probability, wind and humidity to provide the maximum water savings you come to expect from a Hunter smart controller.
How to Replace the Front Panel
Step One | Step Two | Step Three |
![]() |
![]() |
![]() |
To remove the Pro-C's front panel, start by removing all power from the controller. Unplugging the transformer or shutting off the circuit breaker will be necessary to do this properly. | Open the front panel similar to how the controllers door opens, this should expose the battery compartment on the back of the front panel. | Locate the gray ribbon cable in the upper right corner on the back of the front panel. |
Step Four | Step Five | Step Six |
![]() |
![]() |
![]() |
Disconnect the ribbon cable from the back of the front panel by carefully pulling the plastic cable connector off the back of the front panel. | Locate the Hinge Release switch below the ribbon cable connector on the back of the control panel. Push down on the white tab, the hinge pins will retract and allow the front panel to come free from the cabinet. | After the panel is removed you can reverse this process to install the new face panel. |
Articles
Videos