Trust Guard Security Scanned
hours left for
same day shipping
hours left for
same day shipping

⚠️ Shipping Times May Vary Based on Inclement Weather Conditions

Loading...

Hydro Rain HRB and Rain Bird Replacement Solenoid | HRB-XXX-SD-RP

SKU
HRB-XXX-SD-RP

Hydro-Rain HRBV-XXX-SD-RP HRB Series Solenoid 24v - Solenoid ONLY

You want a valve you can install and forget - one that goes on working flawlessly year after year even in pressures up to 200 PSI. That's why we built the HRB series valves with a durable glass-filled nylon and a fabric-reinforced diaphragm: to ensure toughness plus reliable, long- lasting performance. The diaphragm spring and fastening components are corrosion-resistant stainless steel, and the flow-control stem is made of solid, heavy-duty brass. A grit screen on the diaphragm prevents problems from sand and debris. Plus, the valve is designed to close slowly to avoid water hammer damage.

Features and Benefits

  • Residential and commercial ready-For use on low flow drip zones to high flow commercial 1in rotor applications
  • Pilot hole filter screen-Prevents debris from inhibiting valve operation
  • Flow control handle-Provides means to manually adjust flow rate to the sprinkler system
  • Slow Closing-Prevents water hammer resulting in less stress on the entire sprinkler system
  • Durable design-Glass-filled nylon body construction for maximum performance under extreme conditions
  • Stainless steel studs-Molded directly into the valve body prevent damage due to over tightening
  • Manual external bleed-Great for year end seasonal shut down (flushing water from the system)
  • Manual internal bleed-For on/off operation at the valve
  • One piece solenoid design-Captured plunger and spring keep for convenient servicing
  • Solid brass and stainless steel-HRB's brass flow control stem and stainless steel diaphragm spring resist corrosion and promote years of reliable service
  • Versatility-Models in the HRB series range from 1in up to 2in

Operating Range:

  • Pressure: 20~200 PSI (1.38~13.80 BAR)
  • Flow: 0.25~200 GPM (0.06~45.40 m3/h; 0.32~12.60 l/s)
  • Water Temperature: Up to 150 degrees F (66 degrees C)
  • Ambient Temperature: Up to 150 degrees F (66 degrees C)

Dimensions:

  • HRB 100 - Height: 6-1/2" (16.5 cm) - Length: 4" (10.2 cm) - Width: 4" (10.2 cm)
  • HRB 150 / 200 - Height: 8" (20.3 cm) - Length: 6" (15.2 cm) - Width: 6" (15.2 cm)

More Information
Brand Hydro-Rain
Type Replacement Solenoid
Warranty 3 Years