King Innovation Waterproof Medium Wire Connectors (100 ct.) | 61241

King Innovation Waterproof
Medium Wire Connectors

From dry to wet, above or below ground, this connector is optimal for direct bury applications operating at 30V or less. Impact-resistant and easy to install, this connector saves you time and money.

Features Benefits

• UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
• For use in Direct Bury applications when operating at 30V or less
• Impact resistant
• #1 in the industry
• Waterproof and corrosion proof
• One-step® installation saves time and money
• No pre-twisting required
• Pre-filled with dielectric silicone sealant that never hardens

Product Specifications & Measurements

• Max. Voltage: 600V max. building wire (1000V max. signs or luminaires)
• Connector Size: 1 19/64" x 43/64"
• Wire Type: Copper/Copper
• Wire Range: Min #22/Max #8
• Temperature Rating: 105°C (221°F)
• Silicone Sealant: -45°F to 400°F
• UL Designation: MWP

Measurements

• A - 1.30"
• B - 0.67"
• C - 0.51"

Installation Instructions

IMPORTANT: Turn off power before installing or removing connector. Product to be used in accordance with local and national codes.

1. Strip wires 5/8" (15.9mm).
2. Align any frayed strands or conductors.
3. Pre-twisting unnecessary. Place stripped wires together with ends of insulation even.
4. Twist connector onto wires pushing firmly until hand-tight. Do not over torque.
5. Wipe sealant in and around conductors and connector opening while tightening. Do not reuse.