Need to raise a sprinkler head? Don't dig it, KAP-IT! Kap-It is designed for the homeowner and professional alike. Kap-It allows anyone to raise a sprinkler head from the top instead of from the bottom! By extending the stem of a standard riser, you have raised the height.
The new snap on top protects the stem extension, while leaving all of manufacturers original parts completely intact. Kap-It keeps the rocks and debris normally introduced into the head when a sprinkler is unscrewed below ground.
The snap on top is designed to still allow regular access to the inside of the head itself, by maintaining the ability to unscrew the top of the canister with the Kap-It , even when more than one is stacked.
When a sprinkler is not above the grass blade height, even the most advanced water saving nozzles distribute water inefficiently. Blockage of the water stream causes increased water waste and run off. As a standard cure to extend the life of risers that are too low, home owners start lowering the deck height of their mowers.
This increases soil temperatures, which increases evaporation, and requires extend water times. By making it fast and easy for anyone to raise their sprinkler heads, water stays efficient and distribution is maximized.
Life expectancy of Kap-It is equal to the head it is being attached to. Kap-It is made to take a beating because there is no change to the original head structure or mechanics thus a minimal possibility of failure. Kap-It has a one year warranty against manufacturer defects.
How to Install:
You can add more than one and use it to unscrew the canister cap.
Articles
Videos
| Brand | KJK Ketterling Enterprises |
|---|---|
| Product Type | Rotor & Spray Head Tools |
| Warranty | 1 Year |
