Rain Bird LX IVM SOL 2-Wire Solenoid | LXIVMSOL

• Compatible with the PGA, PEB, PESB, BPES and EFB-CP Rainbird Valves
• 1 Solenoid
• 2 WC20 connectors
• 2 Wire-Nuts
• 1 White Solenoid Seal

Features & Benefits

• Field Devices are installed along the 2-Wire path to interface with valves and other hardware.
• Interfaces with LX-IVM to control station valves and master valves
• Rain Bird WC20 connectors (included with IVMSOL) to be used for all splices

This product can be used in conjunction with the ESP-LXIVM Series Controllers and its respective ESP-LXIVM 2-Wire Field Devices. These devices (sold separately) include the:

• IVM-SOL: Control station or master valves
• IVM-OUT: Interfaces with LX-IVM to manage 3rd party valves and external gear such as pump stations
• IVM-SEN: Interfaces with LX-IVM to control weather sensors or flow sensors
• IVM-SD: provides surge protection on the 2-Wire path

Product Details

IVM-SOL Installation

1. Use pressure sprayer to clean equipment
2. Check that O-rings are free from damage or debris
3. Attach IVM-SOL hand-tight (with no water pressure)

Note:If the valve is NOT at the end of the 2-Wire Path then make a three-way splice; the red wire from the IVM-SOL to the two red wires of the 2-Wire Path; then splice the IVM-SOL black wire to the two black wires of the 2-Wire Path. Use only WC20 splice kits for all wiring connections to the 2-Wire Path. Improper wiring can cause serious damage to your controller or irrigation system.

Related Articles & Videos

Articles

• How To Replace An Irrigation Valve Solenoid
• Troubleshooting Chart: Valves
• How To Test A Buzzing Irrigation Valve Solenoid

Videos

• Rain Bird Valve Diaphragm Replaement
• Replacing The Top Of A Rain Bird Valve
• FAQ- Sprinkler Wire