A superior saddle tee for Polyethylene pipe that eliminates the hassles and problems associated with insert fittings. No removable gaskets or seals to lose. Molded-in barb seal. No clamps to rust or corrode. Lowest profile saddle tee available. T-Bolt and Nut made of fiberglass reinforced nylon. 2-1/2 in. length protects seal if pipe is kinked or damaged near the saddle tee. Patent #478189. Made in the USA.
This device is not self-tapping. An HTC-Combo Coring Tool is recommended to use along with this device to create a hole in the poly tubing.
To install the tee you will need a 14mm or 9/16 nut driver, or socket with socket wrench. An extension on a socket wrench will make installation much easier. Do not overtighten.
|Max Working Pressure||270 PSI|
|Burst Pressure||1440 PSI|