Order today, ship today!

Left for Same-Day Shipping

Free Shipping Offer to Orders over $149

Rain Bird PGA In-Line / Angle Valve with Flow Control 2" FPT | 200-PGA

In stock
SKU
200-PGA
Free Shipping on Orders over $149
on sale $95.98
$190.47
you save 50%

Rain Bird 200-PGA 2 inch FPT Globe/Angle Valve with Flow Control

  • 2" Rain Bird 200-PGA Valve
  • With Flow Control
  • 2" Female Threaded Inlet/ Outlet


Built for high-end residential and light commercial applications, Rain Bird PGA series valves are the toughest, most reliable valves in their class. These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure. For maximum peace of mind, PGA series valves also offer a best-in-class, three-year trade warranty. Because you care about your reputation and so do we.


Features & Benefits

  • Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions
  • Robust construction and electrical design for quiet performance you can count on
  • Filtered pilot flow to resist debris and clogging
  • Slow closing to prevent water hammer and subsequent system damage
  • Normally closed, forward flow design accepts latching solenoid for use with Rain Bird battery-operated controllers
  • Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance*
  • Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service
  • Three-year trade warranty
  • Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers
  • Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1½"); PGA-NP-HAN2 (2")

Product Details

  • Pressure: 15 to 150 psi (1.0 to 10.4 bar)
  • Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)
  • Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
  • Temperature: Up to 110°F (43°C)
  • 24 VAC 50/60 Hz (cycles per second) solenoid
  • Inrush current: 0.41A (9.9VA)
  • Holding current: 0.14A (3.43VA)
  • Solenoid Coil resistance: 30-39 Ohms, nominal

Dimensions

  • 100-PGA: 7 1/4" x 5 1/2" x 3 1/4" (18.4 cm) x (14.0 cm) x (8.3 cm)
  • 150-PGA: 8" x 6 3/4" x 3 1/2" (20.3 cm) x (17.2 cm) x (8.9 cm)
  • 200-PGA: 10" x 7 3/4" x 5" (25.4 cm) x (23.5 cm) x (12.7 cm)

PGA Valve Pressure Loss (psi)
Flow GPM 100-PGA Globe 1" 100-PGA Angle 1" 150-PGA Globe 1½" 150-PGA Angle 1½" 200-PGA Globe 2" 200-PGA Angle 2"
2 5.1 4.3 - - - -
5 5.5 5.0 - - - -
10 5.9 5.5 - - - -
20 6.0 5.6 - - - -
30 6.4 5.5 1.9 1.3 - -
40 7.0 7.5 3.2 2.0 1.2 -1.0
50 - - 4.8 3.0 1.5 0.9
75 - - 11.1 6.5 3.0 1.7
100 - - 19.2 11.7 5.5 3.0
125 - - - - 8.6 4.8
150 - - - - 12.0 6.5
Rain Bird 200-PGA 2 inch FPT Globe/Angle Valve with Flow ControlPGA Cutaway


Extreme Durability

The PGA valve maintains a strong, worry-free seal between the body and bonnet, no matter the conditions. PGA valves were exposed to extreme temperature swings and intense pressures. The result: zero leaks.

Burst Test

If high water pressure strikes, you need to be prepared for the worst-case scenario. For the Burst Test, we ramped up the pressure as high as it could go. We did the same for the valves of a leading competitor. The results were telling. While the competition exhibited body-to-bonnet leaks under pressures as low as 100 psi (6.9 bar), the PGA valve held strong, even at 440 psi (30 bar).

Pressure-Resistant Seal

The PGA valve's body-to-bonnet seal is built to overcome the intense water pressure typical of many commercial sites. Faced repeated pressure surges well into the triple digits, our valves outlasted the nearest competitor more then 2½ time to 1.


Related Articles & Videos

Articles

Videos

Brand:
Rain Bird
Weight:
3.700000
Type:
Valve
Series:
PGA
Flow Rate:
40 - 150 GPM
Flow Control:
Flow Control
Connection Type:
FPT
Application:
Residential and Commercial
Body Material:
Rugged PVC
Solenoid:
Yes
Valve Type:
In-Line / Angle
Product Type:
Valve
Valve Type:
In-Line / Angle
Connection:
FPT
Flow Control:
Flow Control
Valve Size (in.):
2"
Average Rating:
5 Stars, 4 Stars , 3 Stars , 2 Stars , 1 Star
5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Heavy duty valve
A Vary good, heavy duty valve, this valve is worth the money invested into it there are cheaper valves out there, but you will be wasting your money these valves will last a vary long time.
April 11, 2018
Purchased
over 2 years ago
Great valve for larger projects
This is the perfect control valve for larger residential or commercial projects.
June 15, 2018
Purchased
over 2 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 13 answers
Why did you choose this?
SprinklerWarehouse.com Store
replacement
L E on Sep 13, 2018
replacement
M M on Jul 12, 2018
replacement
L E on Sep 13, 2018
most important
F C on Aug 3, 2018
replacement
M M on Jul 12, 2018
good product
C O on Jun 25, 2018
A value and easily serviceable.
A R on May 12, 2018
Needed for job. Great product,great pricing
R J on Mar 11, 2018
We have purchased these in the past. Well satisfied
N E on Mar 22, 2017
Repair Project. Let's hope the defect has been corrected.
Anthony P on Dec 26, 2016
most important
F C on Aug 3, 2018
good product
C O on Jun 25, 2018
what is the difference between the PGA and the PGA-B valve?
A shopper on Aug 17, 2014
what is the gpm on this valve?
walterc on Jul 21, 2015
BEST ANSWER: •Flow: 2 –150 gpm (0,45 to 34,05 m3
/h;
7,8 to 568 l/m)
• Flow with PRS-D: 5 –150 gpm (1,14 to 34,05
m3
/h; 19,2 to 568 l/m)
Are the valves "slip or threaded" ?
Bruce M on Jul 20, 2015
BEST ANSWER: Threaded 2" npt.
what is the difference between the rainbird 200 pga-b and the pga 200?
A shopper on Jul 17, 2017
BEST ANSWER: Nothing is different (as far as I can tell) I think they just dropped the b off the end of the part #. Same valve, same configuration, same flow characteristics.
Is this valve a normally open or normally closed valve?
alan c on Jul 27, 2015
BEST ANSWER: It is normally closed,
Is there a DC solenoid option available?
A shopper on Jun 13, 2018