Tempo T250V 1/4 in. Black Vinyl Tubing (0.170 ID x 0.250 OD) (40 PSI) (500 ft.) | T250V-500

• PSI: 40
• Length: 500 ft
• Diameter: 0.170 ID x 0.250 OD

Features & Benefits

Micro-tubing (also known as spaghetti, feeder, or distribution tubing) is available in a variety of sizes, coil lengths, and materials (polyethylene or vinyl). The polyethylene (Linear Low-Density Polyethylene) is stronger and a little stiffer and works well in all weather with the barbed micro-fittings. Vinyl tubing is a lot more flexible but will not adhere to the micro-fittings as well especially in high temperatures and pressures. Micro-tubing is often used as a feeder line from the supply tubing to the dripper or jet. A full range of micro-fittings is available for use with micro-tubing.

• Extruded from the finest quality resins
• UV resistant, contains a minimum of 2% concentrated carbon black, an antioxidant that protects the tubing from thermal degradation
• Supported by quality control standard and processes to ensure consistent coils productions
• Exhibits outstanding environmental stress-cracking resistance and burst strength

• Can be used with drip emitters, micro-sprays, or micro-sprinklers in above or below grade installation.

Product Details

• Operating pressure: up to 50 PSI
• Polyethylene Material: Dow 7510 linear low-density polyethylene resin with a minimum of 2% carbon black
• Available in lengths of 50', 100', 500', 1,000', 1,250', 1,500', and 2,000'
• Other lengths available by request
• Poly available in three sizes: 0.125" ID x 0.187" OD - 0.160" ID x 0.220" OD - 0.170" ID x 0.250" OD
• Vinyl available in one additional size: 0.155" ID x 0.250" OD

Related Articles & Videos

Articles

• Step By Step Drip Irrigation System Installation Guide
• Drip Irrigation Benefits & How It Works
• Drip Irrigation Tubing Basics

Videos

• Why Use Drip Irrigation?
• Drip System Zones