Pressure compensating drip emitters (PC Emitters) deliver a consistent output of water, even with changes in elevation or pressure due to long drip runs. These drip irrigation emitters are best used in landscapes and gardens that have changes in elevation or longer drip runs that would otherwise lead to inconsistent flow rates.
The turbulent flow labyrinth with floating silicon diaphragm design provides a self-cleaning mechanism to minimize clogging Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
Can be used with 1/4" distribution tubing and 1/2" or 3/4" supply tubing. If installing directly into 1/2" or 3/4" supply tubing, the emitter can be inserted directly without the use of a hole punch. If the emitter is plugged directly into supply tubing, 1/4" distribution tubing may be attached to the outlet and routed to the plant. In this case, a bug plug may be used to protect the end of tubing from bugs. To prevent dirt from entering the drip emitter, 6" support stake may be used to keep the emitter and end of tubing up off the ground.
Pressure compensating from 10 50 PSI
Consistent output regardless of water pressure changes
Pressure compensation enables the use of longer laterals with smaller diameter tubing
Self-piercing barbed inlet for installation into supply tubing (may be installed without a hole punch)
Can also be used with 1/4" distribution tubing.
When installed directly into the supply line, distribution tubing can be attached to the barbed outlet.